Repeat Play; Displaying The Text - Alpine CDA-9855 Owner's Manual

Repeat Play

Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode → Source
operation mode* → Source select mode
* CDA-9855 only
2
Press the GlideTouch bar under the RPT function
in the function guide display.
The song will be played back repeatedly.
↔
RPT (off)
(Repeat One)
The RPT mode is canceled by selecting off.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
• During repeat playback, no other songs are selectable by pressing
g or f.

Displaying the Text

You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
CDA-9855
ELAPSED TIME
1
ARTIST NAME*
1
ALBUM NAME*
ELAPSED TIME
1
SONG TITLE*
CALENDAR
ELAPSED TIME
ELAPSED TIME
1
ARTIST NAME*
1
ALBUM NAME*
CDA-9853
1
ARTIST NAME*
1
ALBUM NAME*
ELAPSED TIME
1
SONG TITLE*
ELAPSED TIME
ELAPSED TIME
EXTERNAL AMPLIFIER
2
INFORMATION*
36
-EN
ELAPSED TIME
→
1
ALBUM NAME*
1
SONG TITLE*
ELAPSED TIME
→
1
SONG TITLE*
EXTERNAL AMPLIFIER
2
INFORMATION*
ELAPSED TIME
→
Sound dependent display
1
ALBUM NAME*
→
1
SONG TITLE*
ELAPSED TIME
1
SONG TITLE*
→
CLOCK
ELAPSED TIME
1
ARTIST NAME*
1
ALBUM NAME*
→
ELAPSED TIME
1
* "NO DATA" is displayed if there is no information.
* 2 Only when an external Amplifier Link compatible amplifier is
connected. For details, refer to "Displaying the External Amplifier
Information" (page 25).
• When the Scroll Setting (page 30) is set to "MANUAL," press and
hold TITLE for at least 2 seconds to scroll the tag information
only once.
• Elapsed time is displayed for 5 seconds immediately after changing
sources or songs, etc. (CDA-9853 only)
• Only alphanumeric characters can be displayed.
• When the artist name, album name or song name is set on iTunes,
and the amount of characters is increased, songs may not be
played back when connected to the adapter. Therefore, a maximum
of 250 characters is recommended. The maximum number of
characters for the head unit is 64.
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed when text information is not
compatible with the CDA-9855/CDA-9853.
→
→
→
→
→