Midi In Filters - Generalmusic RealPiano RP150 Owner's Manual

5. MIDI In Filter
This function allows you to block the reception of certain MIDI messages
which might be unwanted on some occasions.
Pressing Page Up shows the following display:
The following table lists the filter in messages available:
Programs
Prog + Vol
Use the DATA +/– buttons to select the message that can be filtered out
of the MIDI IN data stream.
The default setting for the MIDI IN Filter is OFF.
For example, if you were playing a MIDI file from an external sequencer
using the El.Grand Preset, you might find that the Preset you have
selected changes every time you start playback of the sequence. This
happens because the sequence includes a Program Change at the
beginning of the song. To overcome this problem, you would select the
MIDI IN FILTER "PROGRAMS".
This means that the RP150 would then ignore any Program Change
messages that it receives from the external device.
The last MIDI In Filter selected is memorized even after turning the
instrument off.
5 FILTER MidiIN
OFF
Midi In filter message
OFF no filter
program change
All Contr All midi controllers
prog.chng & volumes
Volume Midi volume
Pedals Hold,sustain,soft
Pitch pitch bend
5 FILTER MidiIN
Programs
47