Samsung 470 Installation Manual page 28

SECURITY (EU Only)
¦
Security is a function to restrict the use of External Sources(USB, HDMI) and TTX Function.
Setting the Security function under Stand-alone Mode
1. Power ON the TV.
2. Enter the Hotel Standalone menu by "Mute + 1 + 1 + 9 + Enter"
3. Enter the Security.
4. Enter the Password. (8-digit numbers)
(Initial Password is "00000000")
5. For activating the Security function, please change the Security On from "OFF" to "ON" by pushing 'Enter' key.
(Initial Security On is "OFF")
6. Power OFF the TV.
(Now, setting of Security function is done. External Source (USB, HDMI) and TTX Function will not be able to use.)
✎
Notes
y Only USB and HDMI Sources are not able to use. (Scart/ PC/ AV/ Component Sources can be used.)
y If use the Security function (Security On: ON), SIRCH function will not be able to use.
y If use the Security function (Security On: ON), there is no OSD pop up for Media Play after connecting the USB.
(Software Update is available by USB.)
y Under Interactive Mode, Security function is not supported.
Hospitality Mode Standalone
SI Vendor OFF
Power On
Channel
My Channel
Menu OSD
Operation
Clock
Music Mode
External Device
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
Changing the Password
1. Enter the Security in Hotel Standalone menu.
2. Enter the Password. (8-digit numbers)
3. Move the cursor to New Password and enter a new password(8-digit numbers) you want to change.
4. Enter the new password one more time for confirmation. (Confirm Password should be same as New Password you
just entered.)
– If you enter the correct numbers, "Success" message will be appeared and go back to the Standalone menu.
– If you enter the incorrect numbers, "Fail" message will be appeared. Please try once again after pushing 'Enter' key.
✎
Notes
If you forget the Password, please contact the SAMSUNG customer care center.
x
28
English
[Hotel-XC]Install Guide.indb 28
SIRCH
Service
Security
Password Input
r
Password Reset
Security On
Password Setting
New Password
Confim Password
Security Settings
********
OK
ON
2012-11-01 2:24:21