Connectivity; Wireless Keyboard; Push To Talk - Nokia N72-5 Quick Manual

Connectivity

Wireless Keyboard

To set up a Nokia Wireless Keyboard or other compatible
wireless keyboard supporting the Bluetooth Human
Interface Devices (HID) profile for use with your device,
use the Wireless Keyboard
enables you to enter text in comfort, using the full
QWERTY layout, for text messages, e-mail, and calendar
entries.
Note: This application is only available in a limited
number of languages.
1
Activate Bluetooth connectivity on your device.
2
Switch on the keyboard.
3 Press , and select
4 Select Options
for devices with Bluetooth connectivity.
5
Select the keyboard from the list.
6
To pair the keyboard with your device, enter a
passcode of your choice (1 to 9 digits) on the device,
enter the same passcode on your keyboard within 30
seconds, and press the enter key on the keyboard. You
do not need to write down the passcode because you
12
application. The keyboard
Connect. > Wireless Keyboard.
> Find keyboards to start searching
can use a different passcode if you need to pair the
keyboard with your device again.
To enter the digits of the passcode, you may need to
press the Fn key first.
7 If you are asked for a keyboard layout, select it from a
list on your device.
8
When the name of the keyboard appears, its status
changes to Connected, and the green indicator of your
keyboard blinks slowly, the keyboard is ready for use.
For details on the operation and maintenance of your
keyboard, see its user guide.

Push to talk

Push to talk (PTT) (network service) is a real-time
voice over IP service implemented over a packet data
network. Push to talk provides direct voice communication
connected with the push of a key. Use push to talk to have
a conversation with one person or with a group of people.
Before you can use push to talk, you must define the
push-to-talk access point and push-to-talk settings. You
may receive the settings in a special text message from the
service provider that offers the push-to-talk service. You
can also use the Settings wizard application for