3.
Press the locking device together until it
engages, see arrow 2.
Installing and folding up
1.
Push out retaining pin 2 on one side until it
engages.
2.
Insert wind deflector with retaining pins into
the openings 1 and 2 on that side of the
vehicle.
3.
On the opposite side of the vehicle, insert
the retaining pin 1 into the opening, pushing
against the spring load.
Push out retaining pin 2 on one side until it
4.
engages.
5.
Fold up the upper part of the wind deflector.
If a seat is in its rearmost position, do not
recline the backrest too far; otherwise, the
wind deflector could be
Online Edition for Part no. 01 41 2 604 501 - © 02/10 BMW AG
damaged.<
Removing and folding
Remove the deflector following the reverse
sequence.
Push the release lever towards the center of the
wind deflector and fold both halves together.
41