Quick Menu - Clarion NX501A Owner's Manual

Action
Tilting up and down
Rotating left and
right
2D or 3D view
Compass in 2D map
view mode
Compass in 3D map
view mode
Location information
Return to normal
navigation
Additional options
Select destination

2.2.5 Quick menu

The Quick menu is a selection of controls and functions that are frequently needed during
navigation. It can be opened directly from the Map screen by tapping
Button(s)
Changes the vertical view angle of the map in
3D mode.
,
Tap the button once to modify the view in large
steps, or tap and hold the button to modify it
continuously and smoothly.
Changes the horizontal view angle of the map.
Tap the button once to modify the view in large
,
steps, or tap and hold the button to modify it
continuously and smoothly.
Tap this button to switch between the 3D
perspective and 2D top-down map view modes.
,
The direction of the compass shows North. Tap
the button to switch to North-up view, and then
,
tap again to rotate the map in the previous
direction.
The direction of the compass shows North. Tap
the button to switch to North-up view, and then
,
tap again to rotate the map in the previous
direction.
Tap this button to open a new screen with
information about the selected map point, the
Cursor.
Tap this button to move the map back to follow
the current GPS position. Automatic map
rotation is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
Tap this button to open a list of additional
features like saving the Cursor as a Favourite
destination, or searching for Places around the
Cursor.
Tap this button to select the Cursor as a new
destination.
calculated.
Description
The route is automatically
.
NX501A English 17