Clarion NX404 Quick Start Manual & Installation Manual page 187

Vehicle profiles:
When you tap , you can set the following parameters:
Button Description
Tap this button to rename the profile for something meaningful.
Enter the average consumption of your vehicle when used in built-up areas. The
unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle when used on highways. The unit for
consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. This helps in estimating the CO
2
emission.
Enter the average fuel price for travel cost calculation. The currency can be set in
Regional Settings.
Set the maximum speed you travel with the vehicle.
Check this box to enable more settings for the below parameters.
Set the total length of the vehicle.
Set the width of the vehicle.
Set the height of the vehicle.
Set if there is a trailer attached to the vehicle.
Set the maximum allowed weight of the vehicle.
Set the actual weight of the vehicle.
Select one or more hazard types if the vehicle carries dangerous material.
NX404 English 95