5
Basic software procedures
5.1
Starting the maintenance task
5.1.1
Switching on the ID indicator
When working in a datacenter environment, switch on the ID indicator on the
front panels of the server for easy identification. The ID indicator can also be
activated via the BMC Web interface and its status reported to the BMC.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the system identification
LEDs.
I
For further information, refer to section
5.2
Completing the maintenance task
5.2.1
Switching off the ID indicator
Press the ID button on the front panel. The ID indicator can also be deactivated
via the BMC Web interface and its status reported to the BMC.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch off the ID indicators.
CX400 S1
Upgrade and Maintenance Manual
"Front panel" on page
205.
77