Functional Overview; Front Panel; Rear Panel - Toshiba DR420KU Owner's Manual

FUNCTIONAL OVERVIEW
n
o
j
j
ttl
"
~ .
o
j
III
. Front Panel
(*)
The unit can also be turned on by pressing these buttons.
1.11
0
ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit, you
must unplug the AC power cord.)
• Iftimer programmings have been set, press to turn the unit
into the timer-standby mode.
2. Disc tray
• Place a disc when the disc tray is opened.
3.
~
OPEN/CLOSE button*
• Press to open or close the disc tray.
4. Infrared
sensor window
• Receive signals from your remote control so that you can
control the unit from a distance.
5. SKIP
I+IlI
button
• During playback, press once midway through a chapter or
track to go back to the beginning of the current chapter
or track. When pressed twice in qUick succession, playback
will start from the preceding chapter or track.
• During playback, press and hold for 1.5 seconds to fast
reverse.
• When playback is paused, press to play back reverse step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow reverse.
6. SKIP
~
button
• During playback, press to skip to the next chapter or track.
• During playback, press and hold for 1.5 seconds to fast
forward.
• When playback is paused, press to play back advance step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow forward.
7.
Display
• Refer to "FRONT PANEL DISPLAY GUIDE" on page 17.
8. HDMI indicator
• Lights up and indicates the HDMI video resolution when
HDMI output is on.
9. DV IN jack (L3)
• Use to connect the DV output of external device with a DV
cable.
10. AUDIO input jacks (L2)
• Use to connect external device with an RCA audio cable.
11. VIDEO input jack (L2)
• Use to connect external device with an RCA video cable.
12. S-VIDEO input jack (L2)
• Use to connect the S-video output of external device with
an S-video cable.
13. • REC button
• Press once to start a recording. Press repeatedly to start
one-touch timer recording.
14.~
PLAY button*
• Press to start or resume playback.
15. • STOP button
• Press to stop playback or recording.
::0
ttl
"
o
...
Q.
j
I.Q
m
Q.
a-:
1. VIDEO IN jack (L1)
• Use to connect external device with an RCA video cable.
2. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video inputs
with a component video cable.
4. HDMI OUT jack
• Use an HDMI cable to connect to a display with an HDMI
compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely shut
down the unit.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decoder, DTS
decoder or other device with a digital audio coaxial input
jack with a digital audio coaxial cable.
7. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
8. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
9. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device with
an S-video cable.
1O.AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio cable.
."
c:
j
"
....
o'
j
V\
ttl
....
c:
'tl
o ....
::r
ttl
...
III
EN 11