Wps Settings - Zonet ZSR4154WS User Manual

WPS Settings

Wi-Fi Protected Setup (WPS) is the simplest way to build connection between
wireless network clients and ZSR4154WS. You don't have to select encryption
mode and input a long encryption passphrase every time when you need to setup
a wireless client, you only have to press a button on wireless client and this
wireless router, and the WPS will do the rest for you.
WPS Settings: To enable or disable WPS function, default setting is Diable.
WPS Mode: Supports two ways to configure WPS settings:
PBC) and PIN code.
PBC(Push-Button Configuration): If you want to use PBC, you have to
push a specific button on the wireless client to start WPS mode, and
switch ZSR4154WS to WPS mode too. You can push WPS button of
ZSR4154WS, or click PBC button in the web configuration interface to
enable WPS
NOTE: Press WPS button of ZSR4154WS for one second and WPS indicator will
blinking for 2 minutes. During the blinking time, you can enable another
Router to implement the WPS/PBC negotiation between them. At present,
the WPS only support one client access. Two minutes later, the WPS indicator
will be off.
26