Chapter 2. 7043-150 System Features; System Features; Bus Architecture; Microprocessor - IBM RS/6000 7043 43P Series Supplemental Service Manual

Chapter 2. 7043–150 System Features
This chapter contains information specific to both the 250MHz and 375MHz options for
the Model 150, and applies to the RS/6000 7043 43P Series User's Guide and the
RS/6000 7043 43P Series Service Guide. All other information is consistent with the
system books.

System Features

Bus Architecture

Five 32-bit PCI adapter slots are available:
v Slots 2 and 3, primary
v Slots 1, 4, and 5, secondary

Microprocessor

v PowerPC 604e 250 MHz with 1MB parity synchronous L2 cache
v PowerPC 604e 375 MHz with 1MB parity synchronous L2 cache

Memory

v 64MB-1GB
v 4 memory module sockets for 64MB, 128MB, or 256MB dual inline memory-module
kit with ECC SDRAM EDO (extended data out)

Diskette Drive

v Standard: 3.5-inch, 1.44MB

Drives

Hard Disk Drives
v 4.5GB, 9.1GB, and 18.2GB Ultra drives
v Maximum supported: 3 internal
CD-ROM Drive
v 32x speed 5.25-inch, with sliding tray (no caddy required)
Other Drives
v Drive bays can accommodate 5.25-inch or 3.5-inch drives, such as hard disk drives,
CD-ROM drives, tape drives, or other removable media drives.

Power Supply

v Autoranging 250 watt, usable with 115 V ac or 230 V ac (Supports Wakeup-on-LAN)
7