Table of Contents
Advertisement
2. Adjust settings.
• IP Address: Enter the IP address for the Jetpack.
• Subnet Mask: Enter the subnet mask address for the
Jetpack. The default value 255.255.255.0 is standard for
small networks. If you change the IP Address, ensure you
use the current subnet mask for IP address range.
• Host Name: Enter the network name for connected device.
• MAC Address: Displays the MAC(Media Access Controller)
or physical IP address for the Jetpack.
• DHCP Server: Turns the DHCP server on or off.
• Start DHCP Address Range At: Enter the start range of
IP address reserved for use by DHCP server table of the
Jetpack.
• DHCP Address Range: Displays the current range of IP
address reserved for use by DHCP server table of the
Jetpack.
• Turn on IPv6: Turns the IPv6 on or off.
• Link Local Address: Displays the local address when IPv6
is enabled.
• Global Address: Displays the global address when IPv6 is
enabled.
3. Click Save Changes.
46 Jetpack Settings
Hide quick links:
Advertisement
Table of Contents
