Playing Back Ipod/Usb Device; Connecting Ipod/Usb Devices - Yamaha CD-C600 Owner's Manual

PLAYING BACK iPod/USB DEVICE
ConnectingiPod/USB devices
Notes
I
iPod
• Use the USB cable supplied with your iPod. Ifno USB cable is supplied, purchase one from Apple Inc.
• Turn off your iPod.
• Do not use a SB hub.
1
~;~~E2£5J~~$"?F~~~
4
Connect your USB device or iPod via USB cable
Playinffba~k
iPod .
1
Press CD/USB to select the iPod/USB mode.
The iPod/USB indicator on the front panel lights up
in orange, then changes to green when playback is
ready.
2
Start playback.
Operate your iPod to start playback, select a track,
pause, and stop playback.
,I,
~'i'~
You can also use the following buttons:
l>
(Playback), [)[)
(Pause),
0
(Stop),
I<KJ
(Skip backward), [>{>j (Skip forward),
<J<J
(Search backward), and [>{> (Search forward) on this unit
or Remote Control.
Note
iPod may not function properly with this unit if software on iPod
is not updated. Be sure to use the latest version of iPod software.
1
Press CD/USB to select the iPod/USB mode.
The iPod/USB indicator on the front panel lights up.
2
Start playback.
Filename is displayed in the front panel display and
playback starts automatically in order by date and
time of creation if playable files are in the USB
device.
3
Select a track.
Press FOLDER V / L:::. on the remote control to
select a folder, and then press
I<J<lJl>l>l
or numeric
buttons to select a track.
4
Stop playback.
Press
0
(Stop).
See page II for more information on MP3/WMA
playback.
9
En
I