Wireless Lan/Bluetooth/Umts (Optional); Switching The Wireless Components On And Off - Fujitsu LIFEBOOK P702 Operating Manual

Wireless LAN/BlueTooth/UMTS (optional)

The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.

Switching the wireless components on and off

Before switching on your device for the first time, the on/off switch for
wireless components must be in the "ON" position.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the wireless components.
You can also deactivate the wireless components individually in the BIOS Setup. In
order to be able to do this, you will either need to know the supervisor password
if one has been assigned, or no password must have been assigned.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
Fujitsu Technology Solutions
Working with the notebook
► Slide the ON/OFF switch into the "ON"
position to activate the wireless components.
Bluetooth Bluetooth WirelessLAN WirelessLAN
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
wireless components.
45