Guide Program Numbers - JVC HR-S6955EK Instructions Manual

54 advanced features

Guide Program Numbers

Guide Program Numbers are used by the VIDEO Plus+ system to identify the correct preset
to record. You should only need to perform this function if:
• using a PlusCode number does not identify a preset number automatically
• you add a channel after Auto Setup has been performed
• you wish to use the VIDEO Plus+ system to record a satellite programme
Manually Setting Guide Program Numbers
get to the guide prog set screen Press m. Move the highlight bar to
the A and B buttons and press
using the A and B buttons and press
SET
enter guide prog number Use the A and B buttons to enter the correct Guide
Program number for the TV station shown then press
enter receiving preset number Use the A and B
buttons to enter the receiving preset number that the VCR uses
to receive the TV station then press
satellite receiver users If the satellite broadcast is received
on your recorder's auxiliary channel 'L-2', select 'L-2' for the
preset position.
return to normal screen Press m.
(or E). Move the highlight bar to
(or E).
(or E).
(or E).
using
INITIAL SET
GUIDE PROG
GUIDE PROG SET
GUIDE PROG TV PROG
4 4
F
CH4
[1] a k
[MENU]: EXIT