Appendix A. Product specifications
This appendix includes the following information:
v Physical specifications
v Power requirements
v Environmental requirements
v Read speeds
v Write speeds
Physical specifications
The physical specifications
Power requirements
The following table lists the power specifications by voltage level for the drive. The
power specifications are measured at the drive power connector and are nominal
values.
Environmental requirements
1. Product-description data represents IBM's design objectives and is provided for comparative purposes; actual results might vary
based on a variety of factors. This product data does not constitute a warranty. Data is subject to change without notice.
© Copyright IBM Corp. 2004
Physical specification
Height
Width
Length
Weight
Power specifications Voltage
At voltage
DC 5V
Specification
Temperature (noncondensing) +5° C to +50° C
Relative humidity
(noncondensing)
1
of the drive are listed in the following table.
12.7 mm (0.5 in.)
128 mm (5 in.)
129 mm (5.09 in.)
210 g (0.42 lb)
Average
1100 mA
Operational
(+41° F to +122° F)
10% to 80%
Maximum
1800 mA
Nonoperational
-20° C to +60° C
(-4° F to +140° F)
5% to 90%
A-1