Samsung SERIES 6+ User Manual page 59

6WHS 
: Remote Control
Remote Control Buttons and Functions
✎
This is a special remote control for the visually impaired and has Braille points on the Power, Channel, Volume, Stop, and Play/Pause buttons.
Turns the TV on and off.
Displays and selects the available video sources.
Have direct access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to select
channel "54-3", press "54", then press "-" and "3".
Adjusts the volume.
Opens the OSD.
Views Media Play (USB).
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel List,
Media Play (USB) menu, etc.
Use these buttons in Media Play (USB) and
Anynet+ (HDMI-CEC) modes. (Q: Controls recording
on Samsung recorders that have the Anynet+ feature)
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button
on the remote.
✎
You can also change the channels by pressing the ; button on the front panel of your TV and adjust the volume by pressing the : button.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
MEDIA.P
1. Turn on your TV, press the MENU button on your
TOOLS
remote. The main menu appears.
The menu's left side has the following menu
options: Picture, Sound, Channel, Setup, Input, Application, and Support.
2. Press the or button on your remote to select a menu option, and then
press the ENTER button.
3. When done using the menu, press the EXIT button on your remote to exit.
Selecting a Source
To watch a movie on your Blu-ray player or watch
POWER
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable TV
input. Sources can be connected to your TV through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the SOURCE button on your remote. Each time
you press the SOURCE button, you change to a different source.
POWER ON/OFF
Turns the remote control light on or off. When on, the
SOURCE
buttons become illuminated for a moment when pressed.
(Using the remote control with this button set to ON will
reduce the battery usage time.)
Returns to the previous channel.
PRE-CH
Cuts off the sound temporarily.
Changes channels.
CH LIST
Displays channel list on thescreen.
MENU
MEDIA.P FAV.CH
Displays Favorite Channel Lists on the screen.
TOOLS INFO
Displays information on the TV screen.
Selects the on-screen menu items and changes the values
RETURN EXIT
seen on the menu.
Exits the menu.
A B C D
MTS SLEEP
S.MODE: Press to select the sound mode.
P.MODE P.SIZE CC
SLEEP: Use to set the sleep timer function.
: Sets the 3D mode.
P.MODE: Press to select the picture mode.
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
Change the channels by pressing the Channel button on the remote.
✎
If your TV is attached to a cable or satellite box, change the channel using
CH LIST
the box's remote.
Connecting a USB Device for Media Play
MENU You can enjoy photo,
0HGLD3OD\
FAV.CH
music, and movie files
INFO
stored on a USB device
9LGHRV
by connecting it to the TV
and using the Media Play
feature. To connect a USB
device for Media Play,
follow these steps:
1. Turn on your TV.
SUM &KDQJH 'HYLFH
2. Connect a USB device
containing photo, music and/or movie files to the
on the back or side panel of the TV.
ON/OFF 3. When USB is connected to the TV, popup window appears. Then you can
select Media Play.
SOURCE
6WHS 
: Media Play Features
The Media Play feature lets you connect to your PC through your home network and
stream PC audio and video files to your HDTV using your remote. To use IPTV or
Samsung PC Share Manager, you must connect your TV to your network. You can
attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly,
using a Samsung Wireless LAN Adapter. Instructions for both connection methods are
below.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable,
depending on your network setup. They are illustrated below:
The Modem Port on the Wall
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
The LAN Port on the Wall
LAN Cable (Not Supplied)
Configuring the Network Connection - Wired
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections. Home networks that support DHCP automatically
provide the IP address, subnet mask, gateway, and DNS values your TV needs to
access the Internet so you don't have to enter them manually.
To configure your network connection for a network that uses DHCP, follow these
steps:
1. Connect your TV to your
network as shown in one of the
illustrations above.
2. Turn on your TV, press the MENU
button on your remote, and then
select Setup Network.
3. Set the Network Type to Wired if
it is not already set to Wired.
4. Select Network Setup. The
Network Setup screen appears.
5. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
Auto acquires and enters the necessary internet values automatically.
6. Select Network Test to check Internet connectivity.
✎
Some networks are Static IP networks. If your network is a Static IP network,
you can not use DHCP to configure the network connection. Instead, you
must enter the IP Address, Subnet Mask, Gateway, and DNS Server
manually. For instructions explaining how to configure a Static IP network,
see your user's manual.
9LHZ 'HYLFHV ==(QWHU =$=5HWXUQ
USB 1 or USB 2 (HDD) port
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or
modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN
Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the
USB 1 or USB 2 (HDD)
The LAN Port on the Wall
LAN Cable (Not Supplied)
TV Rear Panel
External Modem
Samsung's Wireless LAN adapter is sold separately and is offered by select
retailers, Ecommerce sites and Samsungparts.com. Samsung's Wireless LAN
LAN Cable (Not Supplied)
adapter supports the IEEE 802.11A/B/G and N communication protocols.
Samsung recommends using IEEE 802.11N. When you play the video over a IEEE
802.11B/G connection, the video may not play smoothly.
TV Rear Panel
Most wireless network systems incorporate a security system that requires devices
that access the network through an access point or AP (typically a wireless IP
Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption
type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will
not support a connection in compliance with new Wi-Fi certification specification
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration
Protocol (DHCP) to configure network connections automatically. If your have a
Static IP network, see your user's manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these
steps:
Network Setup
1. Connect your TV to your network
7 as shown in the illustrations
Internet Protocol Setup : Auto
above.
IP Address :
Subnet Mask :
2. Turn on your TV, press the
Gateway :
button on your remote, and the
select Setup
DNS : Auto
3. Set the Network Type to
DNS Server :
Wireless if it is not already set to
Wireless.
& 0RYH ==(QWHU =$=5HWXUQ
4. Select Network Setup. The
Network Setup screen appears.
5. On the Network Setup menu, select an AP (Access Point) or ad hoc network.
If you have selected a network with a security key, the Security Key screen
appears.
6. Enter the security key using the numbers on the remote, and then press the
Blue button on your remote.
✎
If your network uses WEP security encryption, 0~9 and A~F will be
available on the Security Key screen. Use the Direction button on your
remote to move to the characters and the enter key to select them.
7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
Auto acquires and enters the necessary internet values automatically.
8. Select Network Test to check internet connectivity.
✎
For more information, see your user's manual.
port on the back of your TV. See the illustration below.
TV Side Panel
Samsung Wireless LAN
Wireless IP sharer Adapter
(AP having DHCP
server)
or
TV Rear Panel
Network Setup
7
Select a network : Not Selected
Internet Protocol Setup : Auto
MENU
IP Address :
Subnet Mask :
Network.
Gateway :
DNS : Auto
DNS Server :
& 0RYH ==(QWHU =$=5HWXUQ
%1$