Manual Focus - Canon G2000 Instruction Manual

Manual focus

Sometimes you will get better results by turning off autofocus and using manual
focus instead. (For a list of difficult to focus subjects refer to p. 64)
1. Frame the picture with the zoom control.
• If you use the zoom after manual focusing, the picture may go out of focus.
2. Press the FOCUS button to switch to manual focus.
• MF appears in the viewfinder.
• The focus remains locked at the point set by the autofocus.
3. Turn the SELECT dial downward to move the focus farther away and
turn it upward to bring the focus nearer.
4. To return to autofocus, press the FOCUS button again.
Notes:
When you turn the camera off, manual focus is canceled.
•
• If you turn the program selector to w position while using manual focus, the focus
remains locked. You may release it and activate the FlexiZone AF by pressing the
FOCUS button.
• You can also adjust the focus temporarily without turning autofocus off — turn the
SELECT dial to set the focus and autofocus will start again as soon as you release
the SELECT dial.
E
39