Stereo And Bilingual Transmissions; Adjusting The Sound Balance; Sound Adjustment - Toshiba 55WL800AZ Owner's Manual

1
From the Expert Picture Settings menu, press s
or r to select Reset and press OK �
2
A confirmation screen appears. Select Yes , press OK �
Viewing the Control Visualization
This feature displays the brightness histogram and control
curve of each scene�
1
From the Picture menu, press s or r until Control
Visualization is selected and press OK � The
histogram window will appear�
Control Visualization
Number
Of
Pixels
Output
2
Press BACK to return to the previous menu�
Using Auto Format
When the TV receives a true HDMI signal picture and
Auto Format is On, the picture will automatically be
displayed in HDMI signal format, irrespective of the TV's
previous setting� When in Digital TV mode, the display
format will follow the broadcasted format�
1
From the Preferences menu, press
Display Settings is select�
2
Press OK and press s or r to select Auto Format
3
Press v or w to select On or Off �

Sound adjustment

Selecting Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound, when bilingual
programmes are received�
1
From the Sound menu, press s or r to select Dual �
28
Using the TV's features (General)
Distribution
Brightness
Control Curve
Input
or
Sound
Dual
Balance
Advanced Sound Settings
Dolby Volume
Dynamic Range Control
Audio Level Offset
Headphone Settings
Audio Description
2
Press v or w to select Dual 1 or Dual 2 �
Note:
• The Dual menu setting status is stored even when
the TV is turned off.

Stereo and Bilingual transmissions

For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds� If
the broadcast is not in stereo, the word Mono will appear�
Stereo ... Press
Bilingual ... Bilingual transmissions are rare� If they
are transmitted, the word Dual will display� Choose the
desired channel number, and if the word Dual appears,
press
or Dual 1 or Dual 2 (German stereo/bilingual broadcast)�
For DTV programmes
For stereo or dual mono broadcasts, press
v or w to select settings�
Mode Display
d Stereo
until
j Dual mono
e Mono
Surround

Adjusting the sound Balance

1
From the Sound menu, press s or r to select the
Balance �
2
Press v or w to adjust the settings as desired�
Adjusting the Sound Navigation
You can customize the sound mode settings. Select the
appropriate mode in accordance with the installation
location of the TV ( Stand or Wall ) and adjust the
equalizer on-screen as desired�
0
to select Stereo or Mono �
to select Dual 1 , Dual 2 , Mono (NICAM)
Pressing w
Stereo S Left S Right
Dual 1 S Dual 2 S Dual
—
—
Dual 1
Low
Off
and use