Descaling - Saeco Syntia Operating Instructions Manual

DESCALING

Limescale build-up is normal with the use
of this appliance.
The display informs you when descaling
is necessary:
Orange
Important Note: It is recom-
mended to refer to the next
section, "Remarks on Descaling", for
some tips about keeping the machine
in perfect working order.
Please use Saeco descaling
solution in your machine. It
has been specifically developed to
preserve performance and function-
ality throughout the lifetime of the
machine and to ensure, with regular
use, a high quality delivered product.
Warning! Never use vinegar as
a descaling solution.
Before descaling, remove the Pannarello
attachment from the steam/hot water
wand as described in the "Cleaning and
Maintenance" section.
• Turn the machine on by pressing the
ON/OFF button. Wait for the machine
to nish its rinse cycle and warm
up.
Warning! Remove the Intenza
lter before adding the des-
caling solution.
• Hold the "
The display will show the icon on the
side.
Red
If you press the "
by mistake, use the "
button to quit.
• 34 • • 34 •
" button for 5 seconds.
" button
"
• Press button "
activation of the descaling cycle.
From this point forward,
the descaling cycle must be
completed before proceeding.
• Mix the descaling solution with water
as speci ed on the package of the des-
caling product and ll the water tank.
Place the tank back in the machine.
• Insert a container below the steam/hot
water wand.
Use a large container for this
process. If you do not have a
container of this capacity, once it is
lled close the knob, empty the con-
tainer and then place it again under
the wand and repeat the procedure.
• After adding the descaling solution
in the tank, turn the selector dial
clockwise to position "
descaling cycle.
Red
• The machine will start dispensing, at
regular intervals, the descaling solution
(the bar shows the cycle progress).
Red
" to confirm the
" to start the