Engine Stop Switch; Ignition Switch - Polaris 600 IQ LXT Owner's Manual

PRE-RIDE INSPECTIONS
Start the Engine and Check

Engine Stop Switch

Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.

Ignition Switch

Make sure the engine stops when the ignition switch is turned to OFF.
Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
Mirror Adjustment
If equipped, adjust your mirrors so they can be used to their full advan-
tage.
Tether Switch (if equipped)
If your machine has a tether switch, remove the tether from the switch to
make sure the engine stops immediately.
Operating Area
Before driving away, check your surroundings. Be aware of obstacles
and make sure bystanders are a safe distance from the snowmobile.
71