Page 2
DO NOT operate the transmitter of any radio equipment near electrical blasting caps or in an explosive environment. DO NOT let children operate any transmitter-equipped radio equipment. Have your radio equipment installed and serviced by a qualified technician. SVS8025TSE...
Technical Support and Service Your Uniden dealer can provide you with technical assistance and information. If your radio does not perform properly, take it to a Uniden dealer for servicing. The radio contains no user-serviceable parts. Unauthorized adjustment will void the warranty and may cause illegal radio operation.
• Virtual Group—Automatically makes a half-duplex Selective Call in order to remain part of the original group, when the radio is in a different cell. • Radio Disable—Allows a service provider to remotely lock a radio when a radio is stolen or when service is disconnected. - 3- SVS8025TSE...
• Talk Back Scan—Also "Automatic Reply on called group." Allows the use of a received group ID, when different than selected ID. Note: Some of the features described above may not be available in your area. Please check with your local Service Provider for more information. - 4 - SVS8025TSE...
Menu Time-out If no action is taken at any Menu item for 5 seconds or more, the setting is stored and the radio returns to the last selected Call Group. - 5- SVS8025TSE...
Page 8
SCAN—Radio is scanning Call Groups. DEL—Selected Call Group is not in the scan list. ROAM—The radio is checked-in to a cell other than your Home Cell. TAC—A Talk-Around-Call is in progress. (Talk-Around Call Group must be selected.) - 6 - SVS8025TSE...
Adjust the Volume 1. Press the top of [VOLUME] to increase the volume. 2. Press the bottom of [VOLUME] to decrease the volume. Each time you press the key, the radio sounds a tone to indicate the volume. - 7- SVS8025TSE...
Replace the microphone in the hanger bracket when finished. Dispatch Call To respond to a Dispatch Call, remove the microphone from the hook (hanger bracket) and press the [PTT] button and speak into the microphone. Release the [PTT] button to listen. - 8 - SVS8025TSE...
1. Use [SELECT] to select the Talk-Around Call Group. 2. Press and hold key [A] for three seconds. An Alert tone will verify the assignment. Use the same procedure to assign other Call Groups to [B] and [C]. - 9- SVS8025TSE...
Functions on page 11), the radio will scan a predetermined list of Call Groups. Call Groups can be added to or subtracted from this list. (See page 15.) When a call is received, the radio stops at that Call Group. - 10 - SVS8025TSE...
Check with your Service Provider or Uniden Dealer for more information. You can set a number of features in the SVS8025TSE through the radio's optional Menus. Press [MENU] to see the next Menu Item. When you are at the desired Menu selection, you'll see the current setting.
Press [MENU] to store the new setting and move to the next Menu item. - Or - Allow the Menu to time out (5 seconds). The new setting will be stored, and the radio returns to the last selected Call Group. - 12 - SVS8025TSE...
SET LOCK Locks all keys on the radio except [VOLUME]. The [PTT] and DTMF keys on the microphone are also still active. 1. Select this item to access the Lock setting. 2. Press [SELECT] to set the Lock. - 13- SVS8025TSE...
Press [MENU] to store the new setting and move to the next Menu item. - Or - Allow the Menu to time out (5 seconds). The new setting will be stored, and the radio returns to the last selected Call Group. - 14 - SVS8025TSE...
Advanced Operation Note: Your radio may have only some of the features programmed. Check with your Service Provider or Uniden Dealer for more information. Editing the Scan List The default scan list contains all Call Groups programmed into your radio.
Busy System Queuing lasts for a maximum of 60 seconds. If a line is not available during that time, the queue will be canceled, and you must try to access a line again, and restart the Queuing. - 16 - SVS8025TSE...
Wait a few seconds and try again. Intercept Tone A single short beep produced during extended attempts at "handshake," indicating retry attempts. This means that the radio is having difficulty contacting the repeater system. - 17- SVS8025TSE...
Page 20
If you are at a Menu Function and do not press a key for more than 5 seconds, you'll hear a two-note tone when the radio times out and returns to the last selected Call Group. - 18 - SVS8025TSE...
Uniden recommends the following installation considerations. Power Requirements The SVS8025TSE requires a 13.6 VDC, 15 ampere power source with a negative ground. Install a fuse in the power leads near the power source to protect the power source compartment and passenger compartment from fire and electrical hazards.
Mobile Power Cable and Fuse (15A) ........AMX 120A Slim Line Base Station Desk Microphone ......AMX 151 Regular External Speaker ............ AMX 250 Heavy Duty External Speaker ........... AMX 260C 11 OVAC Power Supply with built-in speaker ....ST1 4P1001 - 20 - SVS8025TSE...