i-mate PDA2 User Manual page 53

Assigning a photo directly from the camera
1. Select Start menu > Programs > Photo Contacts.
2. Select a contact from the list in the Caller ID screen, or create a new one by selecting New
from the Edit menu.
3. Select Assign Photo from Camera from the Edit Menu. You will be switched to Camera
mode and allowed to take one new photo.
4. After you take the picture, the "Display Settings and Preview" screen will appear. Choose
the desired settings, then tap OK to assign the newly-captured image as a Photo ID.
Unassigning a photo
1. Select Start menu > Programs > Photo Contacts.
2. Select the contact entry whose Photo ID assignment you want to remove.
3. Select Unassign Photo from the Edit menu. Tap Yes in the pop-up box to confirm.
Viewing your contacts by photo
1. Select Start menu > Programs > Photo Contacts.
2. Tap the Photo Dialer View icon in the Command Bar at the bottom of the screen. Or,
select Photo Dialer View from the View menu. This will display the Photo IDs you have
assigned, in a thumbnail view. Contacts for whom no Photo ID has been assigned will not
be listed.
In the Photo Dialer view mode, the View Menu contains three additional commands that allow
you to specify the size of the thumbnail images: Large Thumbnails, Normal Thumbnails
and Small Thumbnails.
To switch back to the default Contacts List View, tap the Contacts List View icon in the
Command Bar at the bottom of the screen. Or, select Contacts List View from the View
menu.
Switching to Detailed View
Detailed View utilizes the full screen to display the Photo ID and all data that has been
entered for a particular contact. First select the desired contact entry, then use any of these
methods:
Select Properties... from the View menu.
n
Tap the Properties icon on the Toolbar.
n
Press the Action button on your Pocket PC Phone.
n
Double-tap a Contact entry.
n
Select Photo View from the Tools menu when using the Pocket Contacts application, if
n
you have previously used the options in Photo Contacts (Tools menu > Options > General
tab) to place that command on the Tools menu.
Pocket PC Phone User Manual 53