Table of Contents
Advertisement
C
2
HAPTER
Making Connections
Follow the instructions in this section to connect your LCD to various audio/video devices; or to view
TV programming from an aerial signal, cable box, or set-top box.
Connecting Power
A power connector located at the rear of the LCD allows you to control the LCD's power on or off
directly. For everyday use, you can quickly and conveniently turn the LCD on or put it in standby mode
by pressing the PWR1 (Red) button on the remote control.
1. Plug the power cord into the power connector on the rear of the LCD unit.
2. Plug the other end of the power cord into a wall socket.
The power indicator on the front panel lights up in red, indicating that the LCD is in standby mode.
To turn on the LCD:
Press the PWR1 (Red) button on the remote control or the POWER ( ) button on the LCD unit to turn
on the LCD.
When the LCD is turned on, the power indicator changes from red to green; the LCD begins to detect the
previously set input signal source. When an input signal source is detected, the source will be displayed
on the LCD screen. If no signal is detected, a "No signal" message will be displayed on the LCD screen
To turn off the LCD:
Press the PWR1 (Red) button on the remote control or the POWER ( ) button on the LCD unit to turn
off the LCD. When the LCD is turned off, the power indicator then changes to red, indicating the LCD is
in standby mode. You can leave the LCD in this mode, or you can disconnect the power mode if the
LCD is not to be used for an extended period of time.
NOTE:
•
Only use the provided power cable. The cable includes a three-prong grounded plug. To keep
power properly grounded, use an appropriate outlet or converter plug.
•
Use only the indicated voltages (AC 100 – 240 V, 50/60 Hz) to avoid fire or electric shock.
12
Advertisement
Table of Contents
