Reversing The Door - Whirlpool WRO34U Series User's Operation Manual

8. Reversing the door

The side at which the door opens can be changed from the right side (as supplied) to the left side, if
required.
Warning!
When changing the side at which the door opens, the appliance must not be
connected to the mains power supply. Remove the plug from the mains before you
start the activity.
Before you start, disconnect the appliance from the mains power supply. Lay the refrigerator on its back
in order to gain access to the base; place it on a suitable soft foam packaging or similar material to avoid
damaging the cooling pipes at the rear of the refrigerator.
1. Remove the top hinge cover and the top hinge bracket by unscrewing the three mounting screws.
2. Lift the upper door and place it on a suitable padded surface to prevent it being damaged. Remove
the blanking plugs, if fitted, to the left hand side holes, on the top and bottom sides of the door and fit
them to the holes on the right hand side.
3. Remove the centre hinge bracket from the centre rail, by removing the screws. As illustrated below.
4. Lift the lower door and place it on a suitable padded surface to prevent it from being damaged.
Remove the blanking plugs, if fitted, to the left hand side holes, on the top and bottom sides of the
door and fit them to the holes on the right hand side.
13