Redialing A Number; Viewing And Returning Missed Calls - Cisco SPA50X User Manual

Using Basic Phone Functions

Redialing a Number

STEP 3
STEP 1
STEP 2
STEP 3

Redialing a Number

Viewing and Returning Missed Calls

STEP 1
STEP 2
STEP 3
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Do one of the following:
• To blind transfer the call, press Trnsfer after the call begins to ring and then
hang up. If you hang up before the target line rings, the transfer fails and the
caller is disconnected. If you misdial, press the line button again to receive a
dial tone (not applicable to the Cisco SPA502G).
• To transfer after speaking privately to the other person, press Trnsfer at any
time during the conversation.
Cisco SPA501G:
During an active call, press the Transfer button.
Enter the number where you want to transfer the call.
Press the Transfer button again.
To redial the last number called from a Cisco SPA502G, Cisco SPA504G, Cisco
SPA508G, or Cisco SPA509G, press the Redial softkey.
To redial the last number called from a Cisco SPA501G, press the Redial button.
The LCD screen on your IP phone displays a Missed Calls message if any calls
were received that were not answered. (The Cisco SPA501G does not have an
LCD screen and does not support these functions.)
To return a missed call:
Press the Setup button.
Select Call History.
Select Missed Calls.
3
25