DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Settings
On the Torrent / Settings page, you can configure the built-in torrent client.
You can specify the following parameters:
Parameter
Service on
Empty start
Work folder
Connection type
Tracker IP
Port
Limit incoming traffic
Limit outgoing traffic
Figure 122. The Torrent / Settings page.
General
Select the checkbox to start the torrent client. If the checkbox is not
selected, you cannot download files and view contents of the tabs
from the Torrent / Torrent-client page.
Select the checkbox to forbid the torrent client to renew downloading
files upon its start.
Select the USB storage folder to which the files that are being
downloaded will be saved.
Select a version of the Internet Protocol which will be used for
downloading and transmitting files.
In the field, you can specify the IP address of the preferred tracker.
Enter the port of the router which will be used by the torrent client.
By default, the standard port is specified (6881).
Transfer
Specify the maximum rate for downloading files.
Specify the maximum rate for uploading files.
Page 143 of 159
Configuring via Web-based Interface
Description