Chapter 3 Connecting Cables; Connecting Multiple Pcs To The Monitor; To Switch The Input Signal; To Set Input Signal Selection [Input Signal] - Eizo FlexScan S1703 User Manual

Chapter 3 Connecting Cables
3-1 Connecting Multiple PCs to the Monitor
Multiple PCs can be connected to the DVI-D, D-Sub mini 15 pin connector on
the back of the monitor to switch the display.
Connection examples
To PC 1
DVI connector
Signal cable (Digital)
FD-C39 (supplied)
●
To switch the input signal
Input Signal Selection button
Switch the input signal with
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for three seconds.
●
To set input signal selection [Input Signal]
Setting
Auto When a PC is turned off or enters the powersaving
mode, the monitor automatically displays another signal.
Manual The monitor detects only the PC's signals currently
displaying automatically. Select an active input signal
with
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
(3) Select "Auto" or "Manual" with
The setting is completed.
D-sub mini
DVI-D connector 15-pin Connector
Signal cable (Analog)
MD-C87 (supplied)
. Input signal switches each time
Function
.
or , and press
To PC 2
D-sub mini 15-pin
Connector
is pressed.
• When "Auto" is selected for <Input
.
.
.

Chapter 3 Connecting Cables

NOTE
Signal>, the monitor's power-saving
function works only when the two
PCs are in the power-saving mode.
21