Canon PowerShot SD950 IS User Manual page 47

Components Guide
145
I
Indicators
The indicators on the back of the camera light or blink under the
following conditions .
• Right Indicator
Green: Ready to shoot (camera beeps twice)
Blinking Green: Time Lapse (movie) recording/Image recording/
reading/erasing/transferring (when connected to a
computer/printer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
• Left Indicator
Yellow:
Macro mode/infinity mode/AF lock mode
Blinking Yellow: Focusing difficulty (camera beeps once)
__
~~~s~t~::~:l~W;~k~
i :
diC
l3J9!
bllnkS;~r~en. Th@~e
- Shake or
jolt
the camera ..
· . i . · . .... . ' . '
- Turn off the
camera,
or open the ,memory
card
slot/battery
cover"
I
Power Saving Function
This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the power button again to
restore power.
•
Shooting Mode
Playback Mode
Connected to a Printer
Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after the
last control is accessed even if [Auto Power Down]
is set to [Off]. Press any button other than the
power button or change the camera orientation to
turn the LCD monitor back on.
Powers down approximately 5 minutes after the
last control is accessed on the camera.
* This time can be changed.
(Jf".
The·power~saVTngfunciiorl
will·
notactivate"duril'l9
asTide~-
- show or while the camera is connected to a computer.
• The power saving function settings can be changed (p. 51).