Rear Seat Cushion; Manual Closing Of Trunk Lid; Manual Retraction Of Trunk Lid Handle - Mercedes-Benz 300 SD Operator's Manual

Rear Seat Cushion

Removal: Push in locking tabs (1) (on
left and right side of seat) and pull up
seat at the front.
Installation: Slide rear edge of cushion
under the backrest so that both wire
loops under the backrest engage at the
seat cushion. Push front of cushion
down until it locks in place.
Caution!
Watch out for sharp edges when
removing or installing the rear seat
cushion, to prevent injury.

Manual Closing of Trunk Lid

The trunk lid can be closed manually
should a malfunction occur on the
power closing system.
With the trunk lid open:
push sliding switch to position (1),
press eye of latch in (2),
push sliding switch to position (3).
Close trunk lid.
Manual Retraction of
Trunk Lid Handle
The trunk lid handle can be retracted
manually should a malfunction occur
with the automatic system.
Push sliding switch down (1)
and to the right (2).
116