Sony PlayStation PSP-1003 Instruction Manual page 113

8
Check the settings.
This screen displays the setting details. Press the left button to return to the
previous screens to correct any of the settings, if necessary.
When you have finished selecting your settings, press the right button to
go to the next screen.
9
Save the connection.
Press the button to save the connection on your system.
10
Test the connection.
Before testing the connection, check that the PSP™ system's WLAN
switch is turned on.
Select "Test Connection", and then press the
connect to the selected access point.
11
Confirm the connection test results.
If the connection is successful, information about the network connection
is displayed. Press the
Hints
• The system will also perform an Internet connection test after connecting to an access
point. The results of the Internet connection test will be shown in the connection results
screen.
• If the connection test fails, follow the on-screen instructions to check the settings.
Network settings for the connection can be changed from the options menu
( page 114). For additional information, refer to the instructions supplied with the
network device and by your Internet service provider.
• If the IP address and DNS information will be obtained by a DHCP server, select
"Custom" in step 7. Each option will be set to "Automatic".
• If you want the browser to start automatically when a connection to an access point is
established, in step 7 select "Custom", and then set the "Internet Browser" option to
button to end the connection test.
button. The system will
Network Settings
113