Table of Contents
Advertisement
Quick Links
TURN TABLES
1.5 TON CAPACITY / 2 PC.
Model 45742
OPERATING INFORMATION
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
2001 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form with-
out the express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353
Advertisement
Table of Contents
Summary of Contents for Central Machinery 45742
- Page 1 TURN TABLES 1.5 TON CAPACITY / 2 PC. Model 45742 OPERATING INFORMATION ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form with- out the express written consent of Harbor Freight Tools.
-
Page 2: Specifications Table
If there is any doubt, do not attempt to use this equipment. USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses when working with this equipment. ANSI approved safety impact eye glasses are available from Harbor Freight Tools. SKU 45742 PAGE 2... -
Page 3: Specific Product Warnings And Precautions
Turn Tables, it may create for a brief instant, an excess load. The Turn Tables are designed for 3,000 lbs. or 1.5 Tons per pair maximum load; do not exceed. SKU 45742 PAGE 3... -
Page 4: Product Overview
Should the Turn Tables indicate a need for front end wheel alignment adjustment (usually by means of adjusting the vehicle’s tie rods), it is recommended that only a qualified technician perform the service, and not while the vehicle is still on the Turn Tables. SKU 45742 PAGE 4... -
Page 5: Operating Instructions
(part #1) in each Turn Table are inserted through the Top Plate (part #4) and Base (part #9). Also, make sure the Scale Pin (part #11) is at the “0” setting on the Scale Plate (part #2). (See Figures B, C, and Assy. Diagram.) SKU 45742 PAGE 5... - Page 6 Remove the two Pins (part #1) from each Turn Table. (See Figures B, C, and Assy. Diagram.) BASE (#9) SCALE PLATE (#2) PIN (#1) PIN (#1) SCALE PIN (#11) TOP PLATE (#4) FIGURE C SKU 45742 PAGE 6...
-
Page 7: Inspection, Maintenance, And Cleaning
Keep the Turn Tables free of oil and grease. Use only a mild detergent and damp cloth when cleaning. Do not use a flammable or combustible solvents to clean the Turn Tables. Once clean, lubricate all moving parts with a light oil. SKU 45742 PAGE 7... - Page 8 Scale Plate Screw Top Plate Ball Ball Holder Big Washer Spring Base Sleeve Scale Pin Washer Screw NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 45742 PAGE 8...