Engine Rpm Setting; Deck Leveling And Height Adjustment; Deck Level Adjustments - HUSTLER ATZ 928143 Parts Manual

SPRING
CHAIN

ENGINE RPM SETTING

The Hustler ATZ is designed so that the engine will run at 3600 rpm static pump load only. At this speed
the hydraulic pumps are running at their maximum rated speed.

DECK LEVELING AND HEIGHT ADJUSTMENT

The mower deck has three areas that may need to be checked and adjusted periodically. Before
considering any mower deck leveling adjustments, check that the tire air pressure is within the specified
range.

DECK LEVEL ADJUSTMENTS

Leveling the deck must be done in the following manner and order:
1. Check tire pressures to make certain they are properly inflated before starting to level
deck. The recommended pressures are as follows:
Drive wheels tire pressure........... 8 - 12 psi
Gauge wheels tire pressure ........ 8 - 12 psi
WARNING: Stop engine. Make sure deck clutch switch is in the down (OFF) position. Place control
levers in the brake position before leaving machine.
2. Park the unit on a flat surface.
108604 10/08
TENSION IDLER
ANCHOR
BRACKET
FIG. 31
FRONT
BLOCKS
12-27
9.00"
3.00"
FIG. 32
4"
FIG. 33