Phone Menu Operation - Pioneer Super Tuner IIID MVH-P8200BT Operation Manual

( Operating this unit
section
) GIl
To connect your cellular phone to this unit via Blue-
tooth wireless technology, you need to enter a PIN
code on your phone to verify the connection. The de-
fault code is 0000. but you can change it with this
function.
OJ
Press
M.e.
to display the setting mode.
rn
Turn
M.e.
to select a number.
[~
Press
M.e.
to move the cursor to the next posi-
tion.
m After inputting the PIN code (up to 8 digits), press
M.e.
The PIN code can be stored in the memory.
• When you press and hold
M.e.
in the same
display, the PIN code you entered is stored in
this unit.
• Pressing
M.e.
in the confirmation display re-
turns you to the PIN code input display. and
you can change the PIN code.
OJ
Press
M.e.
to display the BO address and device
name.
To check the availability of this unit from other de·
vices, Bluetooth visibility of this unit can be turned
on.
U]
Press
M.e.
to turn the visibility of this unit on or
off.
• While setting Special Device, Bluetooth visibi-
lity of this unit is turned on temporarily.
OJ
Press
M.e.
to turn automatic connection on or
off.
1 Display the phone menu.
Refer to Basic menu operations on page 12.
Phone menu operation
O,mportant
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration,
W
Press
M.e.
to start searching.
• To cancel, press
M.e.
while searching.
W
Turn
M.e.
to select a device from the device list.
• If the desired device is not displayed, select
Search Again.
•
If five devices are already paired, Memory
Full is displayed and it is not possible to per-
form this operation. In this case, delete a
paired device first.
IT]
Press and hold
M.e.
to switch the BO address
and device name.
m Press
M.e.
to connect the selected cellular
phone.
While connecting. the circular indicator flashes.
To complete the connection, check the device
name (MVH·P8200Bn and enter the link code on
your cellular phone. If the connection is estab·
lished, a circular indicator appears next to the de-
vice name.
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your Blue-
tooth device is listed as a special device. select the
appropriate one.
W
Press
M.e.
to display the setting mode.
rn
Use
M.e.
to select a special device.
Turn to change the menu option. Press to select.
[~
Use a cellular phone to connect to this unit.
While connecting, the circular indicator flashes.
To
complete
the
connection, check the device
name (MVH-P8200Bn and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
• If five devices are already paired, Memory
Full is displayed and it is not possible to per-
form this operation. In this case, delete a
paired device first.
W
Press
M.e.
to display the setting mode.
rn
Turn
M.e.
to select the name of a device you want
to delete.
W
Press
M.e.
to select the device you want to delete.
Press and hold
M.e.
to switch the BO address
and device name.
mUse
M.e.
to select
Yes.
Turn to change the menu option. Press to select.
To cancel, select No.
• While this function is in use, do not turn off the
engine.
En
aD