Focus Lock
Focus lock shooting is recommended when the camera does not activate the focus area that
contains the desired subject. The following explains how to use focus lock when A Point and
shoot is enabled and the focus area is displayed in the center of the frame.
1
Position the subject in the center of
the frame and press the shutter-
release button halfway.
• Confirm that the focus area glows green.
• Focus and exposure are locked.
2
Without lifting your finger, recompose the
picture.
• Make sure to maintain the same distance between the
camera and the subject.
3
Press the shutter-release button the rest of
the way down to take the picture.
1 / 2 5 0
1 / 2 5 0
F 3.3
F 3.3
1 / 2 5 0
1 / 2 5 0
F 3.3
F 3.3
55