Samsung UN32C5000 User Manual page 59

I
Securing the TV to the Wall
(depending on the model)
• Accessaries
Holder-TV
~
Screw(i)(M4 X L16)
~
ScrewQ) (M8 X L19)
• To prevent the TV from falling (According to the TV type, see drawing annex)
1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV [lor 2) with the screw through the hole.
~ Make sure to only use the supplied screws.
~ When you install the wall-mount, refer to the "Securing the TV to a wall or Cabinet" in the TV manual for installation type.
[@Type] [® Type]
r - - - - - - -
[© Type] - - - - - - - - - ,
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws
fastened on the wall or cabinet so that the TV is fixed.
~ Purchase the screws to be used on the wall or cabinet separately.
~ Install the TV close to the wall so that it does not fall.
~ When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
~
Confirm that the cord or link does not come loose frequently.
~ Before moving the TV, separate the connected cord first.
Wall
~ Use the Wood screw (sold separately) from the size M4 X L20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional installer.
I
Securing the TV to the Wall
(depending on the model)
• Accessaries
Holder-TV
~
Screw(i)(M4 X L16)
~
ScrewQ) (M8 X L19)
• To prevent the TV from falling (According to the TV type, see drawing annex)
1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV [lor 2) with the screw through the hole.
~ Make sure to only use the supplied screws.
~ When you install the wall-mount, refer to the "Securing the TV to a wall or Cabinet" in the TV manual for installation type.
[@Type] [® Type]
r - - - - - - -
[© Type] - - - - - - - - - ,
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws
fastened on the wall or cabinet so that the TV is fixed.
~ Purchase the screws to be used on the wall or cabinet separately.
~ Install the TV close to the wall so that it does not fall.
~ When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
~
Confirm that the cord or link does not come loose frequently.
~ Before moving the TV, separate the connected cord first.
Wall
~ Use the Wood screw (sold separately) from the size M4 X L20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional installer.