Toshiba MW14F52 Service Manual page 20

1-8: VCR DECK (Refer to Fig. 1-8)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
1. Move the Cassette Holder Ass'y to the back side.
Remove the 3 screws 1.
2.
Remove the screw 2.
3.
4. Remove the FE Head.
5. Disconnect the following connectors:
(CP101, CP4501 and CP4502).
6. Remove the AC Head Cover and VCR Deck in the
direction of arrow.
1
1
2
FE Head
CP101
DISASSEMBLY INSTRUCTIONS
1
AC Head Cover
VCR Deck
CP4501
CP4502
Bottom Plate
Fig. 1-8
1-9: VCR MT PCB (Refer to Fig. 1-9)
Remove the screw 1.
1.
Remove the 3 screws 2.
2.
3. Remove the AV Jack Shield.
4. Remove the VCR MT PCB in the direction of arrow.
2
AV Jack Shield
VCR MT PCB
B1-3
2
1
2
Bottom Plate
Fig. 1-9