Transport Position - Husqvarna 326HDA55X-Series, 326HE3X-Series, 326HE4 Operator's Manual

• Tighten the knob.
WARNING! Do not hold the cutting head
!
when you adjust the angle. The blades are
sharp and you could easily cut yourself.

Transport position

(326HE4)
Once the work has been completed fold the cutting unit back
against the shaft to simplify transport and storage of the
hedge trimmer.
1 Turn off the engine.
2 Loosen the knob on the shaft (clockwise).
3 Grip the handle on the cutting unit and angle the cutting
unit upwards. At an angle of 90 degrees there is a stop
position. To pass the stop position, pull out the lock button.
4 Fold down the cutting unit against the shaft.
5 Turn the knob (anti-clockwise).
CAUTION! When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit in this
position.
WORKING TECHNIQUES
– 17
English