Basic Working Techniques - Husqvarna 325HE3 X-series Operator's Manual

• Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
• Store the machine out of reach of children.
• Use only original spare parts for repairs.

Basic working techniques

• Work with a swinging action from the bottom upwards
when trimming sides.
• Adjust the throttle setting to suit the load.
• When trimming a hedge the engine should always face
away from the hedge.
• Hold the machine as close to your body as possible to get
the best balance.
• Make sure that the tip does not touch the ground.
• Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
10 –
English
SAFETY INSTRUCTIONS
Changing the hedge trimmer angle
(325HE3,325HE4)
• Undo the knob.
• Grasp the handle on the angle stop, adjust to the desired
angle and then tighten the knob.
(325HDA55)
• Undo the knob.
• Press the cutting head against the ground or some other
solid object until the desired angle has been obtained.
• Tighten the knob.
WARNING! Do not hold the cutting head
!
when you adjust the angle. The blades are
sharp and you could easily cut yourself.