Philips 65PFL4909 User Manual page 10

To obtain a more detailed electronic copy of this User Manual, go to www.philips.com/support
2
Use HIJK to select the item you want to adjust,
then press OK.
to select the desired Setting, then press OK
Auto picture
(Personal, Standard, Vivid, Sports, Movie,
Game, Energy saving and Internet video)
J Cursor
to Reduce Power
Backlight
Consumption and
Brightness
Contrast
to Decrease Contrast
to Decrease
Brightness
Brightness
to Decrease Color
Color
Intensity
Tint
to Add Red
Sharpness
to Soften
to select the desired Setting, then press OK
(Color alignment, Noise reduction, Light
sensor
Advanced settings
Gamma, Perfect Motion Rate (or 120 PMR)
MPEG artifact reduction, Color enhancement,
Custom color management and Film mode)
Note(s)
O
Adjusts Backlight for the Best Picture Quality by Dynamically
●
Adjusting the Backlight Intensity in accordance with the Room
Lighting Condition when Light sensor
ensure the Room Lighting is Stable and the Light Sensor is Not
Blocked.
*1 Not available for 32PFL4909, 32PFL4609.
*2
For 55PFL4909, 50PFL4909, 49PFL4909, 40PFL4909,
40PFL4609, 32PFL4909, 32PFL4609, 120 PMR will be
displayed instead of Perfect Motion Rate.
Changing Sound Settings
1
Display Setup using Home Menu and use HI to select
Sound, then press OK.
Settings assistant Auto sound
Picture Equalizer
Balance
Sound
Features DTS TruSurround
Installation Auto volume leveling
Software
TV speakers
Headphone volume
Digital output format
Cursor K
to Increase Power
Consumption and
Brightness
to Increase Contrast
to Increase Brightness
to Increase Color
Intensity
to Add Green
to Sharpen
, Black stretch, Dynamic contrast,
*1
is Set to On. Please
*1
Personal
Start now
Off
Off
On
PCM
2
Use HIJK to select the item you want to adjust,
then press OK.
The following sound settings can be configured. Depending on
●
the sound source, some sound settings are not available.
Auto sound
Equalizer
Balance
Digital audio
language
Alternate audio
,
*2
Mono/Stereo
DTS TruSurround
Auto volume leveling
TV speakers
Headphone volume
Digital output format
If a
channel
Delta
or input
volume
device
is...
10
to select the desired Setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie,
Music and News)
to select the specific frequency using HI, and
use JK to Adjust the Level, then press OK.
Adjusts the balance of the Right and Left
speakers to Best suit your listening position.
Available for Digital channels only when
multiple languages are broadcast. Lists
available audio languages.
Available for Analog channels
only when a Main and Second
Main
Audio Program (SAP) is
broadcast. Select the Main
Audio Program.
Available for Analog channels
only when a Main and Second
SAP
Audio Program (SAP) is
broadcast. Select the Second
Audio Program.
Mono
to Output Mono-audio.
Stereo
to Output Stereo-audio.
to set DTS TruSurround™ to
Off
Off
to set DTS TruSurround™ to
On
On
to Remove the Auto volume
Off
leveling
to Reduce Volume Differences
On
between the TV Commercials
and the Programs
No Output Sound from the
Off
Unit's Speakers
to Output Sound from the
On
Unit's Speakers
to control Audio Output from
Speakers
your connected HDMI Link
EasyLink
devices
Adjusts headphone volume.
PCM
to Output PCM format.
to Output Audio in its native
Bitstream
format as Bitstream to
connected Audio receiver.
Navigate to that channel or
input device and set a negative
too loud
delta volume level as per your
personal preferences.
Navigate to that channel or
input device and set a positive
too soft
delta volume level as per your
personal preferences.