Quick Start - Samsung S9c User Manual

S9c series
Hide thumbs Also See for S9c:
Table of Contents

Advertisement

S9C
Attach the TV to
Connect video
the Stand
devices
Step
Step
1
2
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Attach the TV to the Stand
1
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
2
x 4
Screws
Stand
M4 x L20 4 pieces
M4 x L10 2 pieces
3
4
5

QUICK START

GUIDE
BN68-05357A-01
Insert the
Power on and
batteries into the
start the initial
remote control
setup
Step
Step
3
Open the package, and remove the cushioning.
Pull the stand out of the top Styrofoam
cushioning, and make the stand face your body,
as shown in the illustration. Insert a finger
into the groove in the middle and pull it up to
separate the cover from the stand.
x 2
Stand cover
Remove the TV from the box. Then, remove
the top and bottom pieces of Styrofoam from
the TV, but keep the screen-protection piece
on. Place the TV down on the the box with the
screen facing down.
Tilt the stand to put its hook into the groove on
the back of the TV, and push it, giving it a slight
turn until it is firmly in place.
Hook
Secure the bottom of the stand to the TV using
two screws.
M4 x L10
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Smart Touch Control
Batteries (AAA x 4)
4
Remote Control
Also included: User manual, 3D active glasses
6
7
8
9
10
One connect and Cables
Power cord
IR extender
RCA Adapter x 2
Component adapter
One connect
One connect cable
Secure the stand to the TV using four screws as
shown in the diagram.
M4 x L20
To replace the stand cover, fix its exterior and
then the interior into the stand. Press both
sides firmly to make sure that it is completely
assembled.
Remove the port cover, and connect the power
cord to the One Connect.
Replace the port cover.
Stand the TV up, and remove the Styrofoam
bumper and the 4 protective pads from the
screen.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kn55s9c

Table of Contents