First Time Operation - Fisher CW20 Operating Manual

First Time Operation

To Operate the Detector,
1) Install the Battery
a. Use a 9-volt ALKALINE battery only (included)
b. Install battery with correct polarity
(align "+" on detector housing with "+" on battery)
c. The battery cover opens and closes with a coin or screwdriver
2) Set the On switch to "ON"
"ON" is the middle position
3) Select Audio or Vibrate Mode
4) Sweep the Detector over the target area.
Detector must be IN MOTION to detect metal
5) Read this manual for proper training in the detection of metal objects