Download Print this page

Specifications - Musical Fidelity M1 DAC Instructions For Use Manual

Unsampling
Hide thumbs Also See for M1 DAC:

Advertisement

Output
Output impedance
Output, digital 0dB level
DAC
DAC circuit
Total correlated jitter
Linearity
Frequency response
Channel separation
Signal to noise
Total harmonic distortion
Connections
Line level outputs
Digital inputs
Power requirement
Mains voltages
Consumption
Weight
Unit only, unboxed
In shipping carton & inc. accessories
Dimensions
Wide
High, including feet
Deep (front to back) including terminals 300 mm (12")
Standard accessories
IEC type mains lead (10-Amp type)
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
M1 DAC issue 2
47 ohms
RCA output - 2.2V r.m.s. nominal (RCA) 4.4V (XLR)
24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
to 192kHz
<12 picoseconds peak to peak
<0.1dB down to -96dB
10Hz to 20 kHz -0.1dB max.
>105dB 20 Hz to 20 kHz
>119dB "A"- wtd.
<0.0025% 10Hz to 20 kHz
1 pair line level RCA (phono), left and right
1 pair line level XLR (balanced), left and right
1 XLR AES balanced digital input
1 RCA coaxial connector SPDIF 32-192 kbps (16-24 bit stereo PCM)
1 TOSLINK optical connector 32-96 kbps (16-24 bit stereo PCM)
1 USB type 'B' connector for computer/PDA 32-48 kbps
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
10 Watts maximum
3.4 kg (7½ lbs)
4.1 kg (9 lbs)
220 mm (8⅔")
100 mm (4")

SPECIFICATIONS

Page 10 of 11

Advertisement

loading