Westinghouse PHN768U User Manual page 6

6 westinghouse
The keep warm setting
Switching the outside ring on and off
By switching the outside rings on or off, the
effective heating surface can be matched to
the size of the cookware.
Triple cooking zone
To switch on the middle ring
To switch on the outside ring
To switch off the outside ring
To switch off the middle ring
Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Switch on
Switch off
When you switch the appliance off, the locking function is automatically switched off.
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm up function When setting a heat
setting using , when starting from
certain amount of time and then automatically switches back to the heat setting set.
Switch on (only when
starting at )
Switch off
Not used
If during the automatic warm up
, the automatic warm up is adjusted.
If there is still residual heat on the cooking zone (display
not performed.
The length of time that the automatic warm up function operates depends on the heat setting
selected.
Heat setting
lies between
Touch
Touch
Touch
Touch
Control panel
Touch
Touch
Control panel
Touch
Touch
Touch
Length of the automatic warm up [min:sec]
and . It is used to keep food warm.
Before an outside ring can be switched
on, the inside ring must be switched on.
Sensor panel
for 1-2 seconds
for 1-2 seconds
for 1-2 seconds
for 1-2 seconds
(for 5 seconds)
the previously set heat setting
, the cooking zone switches to full power for a
Possible heat settings
to
to /
to
a higher heat setting is selected, e.g. from
0:30
1:00
1:40
4:50
Power indicator
One power indicator is lit
Two power indicators
are lit
The second power indi-
cator goes out
The first power indicator
goes out
Display
Display
(after 5 seconds)
to
to
), the automatic warm up is
to