Sirius Satellite Radio Stratus 5 User Manual page 50

Satellite radio
Hide thumbs Also See for Stratus 5:
Table of Contents

Advertisement

Step 2: Prepare the FEA for temporary installation
Attach the suction cups to the antenna portion of the FEA in the positions shown in
Figure 30 . The antenna portion of the FEA is the relatively thinner section of the cable
in between the bead and the arrow that transmits the FM signal to your vehicle's FM
antenna.
ATTACH SUCTION CUPS AS SHOWN
ANTENNA
CONNECTS TO YOUR SIRIUS
ARROW
BEAD
ON BOTH ENDS OF THE THIN WIRE
CABLE
VEHICLE DOCK'S 'FM OUT'
CONNECTOR
THIS THINNER PORTION OF THE FEA IS
DURING THE FINAL INSTALLATION USE THE CABLE
WHAT TRANSMITS THE FM SIGNAL TO
GUIDES TO HOLD THE CABLE IN POSITION UNTIL
YOUR VEHICLE'S FM ANTENNA
IT REACHES THE INNER TRIM OR MOULDING
Figure 30
Step 3: Use the suction cups to temporarily install the FEA according
to your vehicle's antenna type
On the next several pages you will fi nd the FEA mounting location for your type of FM
antenna (A, B, C, etc.). Before attaching the FEA, clean the area where the suction cups
will be mounted with the supplied alcohol swab. The FEA wire between the two suc-
tion cups should be pulled taut and as straight as possible, and should not obstruct the
driver's view.
[
]
50
Installation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents