Using Your Refrigerator; Ensuring Proper Air Circulation; Multi Flow; Door Alarm - LG LFC23760 Series Owner's Manual

ENSURING PROPER AIR CIRCULATION

In order to obtain stable temperature, the air must flow
between the freezer and refrigerator sections. As shown
in the illustration below, the cold air enters through the
bottom part and circulates upward. This air returns below
the freezer floor and the rest of the air enters the
refrigerator section through the top vent.

MULTI FLOW

The cooling fan operates more powerful and effective
than when in normal operation. This is especially
noticeable when new food is placed in the refrigerator
compartment.
If the lining is damaged, water or other substances
could enter through the cool air vent causing decreased
efficiency.
Do not block any of these vents with packages of food.
This can interrupt the flow of air and cause temperature
and moisture problems.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, make sure you wrap or cover foods tightly (See the
"Food Storage Guide" section for details).

DOOR ALARM

With this feature you will hear an alarm when the freezer
or refrigerator door is ajar for more than 1 minute. These
tones will repeat every 30 seconds. The alarm is cancelled
when the door is properly shut.

USING YOUR REFRIGERATOR

19

ADJUSTING THE CONTROLS

Your refrigerator has two controls that allow you to regulate
the temperature the freezer and refrigerator compartments.
Initially set the REFRIGERATOR CONTROL and the
FREEZER CONTROL at position number "4".
Leave it on these settings for 24 hours (one day) in order
to stabilize the refrigerator. After this you may adjust the
compartments to your desired temperature.
Refrigerator Control: Position 1 to 7 (32 ° F to 47 °F
or 0 °C to 8 °C)
The lower the degree, the colder the refrigerator
compartment will become.
REFRIGERATOR TEMP
WARMER
ADJUST
Freezer Control: Position 1 to 7 (-6 °F to 9 °F or
-21 °C to -13 °C)
The lower the degree, the colder the freezer compartment
will become. Despite this, the compartment of the
refrigerator will be less cold because air flows in smaller
quantities.
Ice Plus
Press the button Ice Plus. The LED light will turn on. This
function will remain activated for 24 hours and intensify
the cooling speed of the frezer and increase ice
production.
FREEZER TEMP
WARMER

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before adding food
to the refrigerator. The mid-settings indicated in the
previous section should be correct for normal household
refrigerator usage. The controls are set correctly when
milk or juice is cold to your liking and ice cream is firm.
The refrigerator control functions as the thermostat for the
entire appliance. The higher the number setting, the
longer the compressor will run to keep the temperature
colder. The freezer control adjusts the cold air flow from
the freezer to the refrigerator. Setting the freezer control
to a lower temperature keeps more cold air in the freezer
compartment to make it colder.
4 IS RECOMMENDED
4 IS RECOMMENDED COLDER
ADJUST