Tv Controls And Indicators - Sony Bravia KDL-46S504 Operating Instructions Manual

TV Controls and Indicators
•
INPUT
ITJ
B----t--rnJ
IMENUI~
Receives IR signals from the remote control.
Senses room light level and adjusts the screen brightness accordingly. Do not put
anything near the sensor or the nearby general area (as shown above), as its function
may be affected.
Lights up in amber when the Timer
or
Sleep functions are set. When the timer is set,
this LED will remain lit even if the TV is turned off. For details, see the online
Reference Book.
Lights up in green when the Backlight is turned off (see the online Reference Book
for more details).
Lights up in red when the function PC Power Management is activated and there
is no signal received while in the PC Input (see online Reference Book for more
details). If the LED blinks in red continuously, this may indicate the TV needs
servicing (see contacting Sony information on the front cover).
Lights up in green when the TV is turned on.
Press to turn on and off the TV.
Press to scan through channels. To scan quickly through channels, press and hold
down either
+/-. In the MENU screen, these buttons serve as up/down buttons.
Press to adjust the volume. In the MENU screen, these buttons serve as left/right
buttons.
Press to display the list of inputs. To toggle through the inputs. press the buttons
CHANNEL +/-.
In the MENU screen, this button serves to confirm the selection or setting.
Press to display MENU with TV functions and settings (see "Using the Menus" on page 20).
-
...
~
J
EFF/TIMER
C
I!D
STANDBY
POW~
(IR) Infrared
Receiver
Light Sensor
~ STANDBY LED
[2J
PIC OFF/
TIMER LED
lID
-~-
I
INPUT
@]
POWER LED
[ID
POWER
[§J
+ CHANNEL -
I1J
+ VOLUME -
[IDMENU
(b;
• The CHANNEL
+
button has a tactile dot. Use it as a reference when operating the TV.
15