Setting Up - Vicks V3700 Series Use And Care Manual

SETTING UP YOUR HUMIDIFIER
Step 1
Placement
Locate the projector lens and
projector cover in the packaging.
Remove water tank from unit.
Insert projector lens with projector
cover into center column and lock
in place.
Kaz will not accept responsibility for property damage caused by water spillage.
Step 1
Soak Filter
Remove tank and set
aside. Remove filter from
humidifier and soak the
filter in cool water.
DO NOT wring filter.
Step 1
Scent Pad
Remove tank and locate
Scent Pad slot.
Step 2
Select a firm, level location at least 6"
(15cm) from any walls for proper airflow.
Place the humidifier on a water-resistant
surface, as water can damage furniture
and some flooring.
Step 2
Remove filter tray from
unit before installing the
wet filter.
Step 2
If there is a used scent pad
in the slot carefully remove
it. Replace with a new scent
pad. Carefully open scent
pad bag taking care to hold
pad using bag. Use care not
to come in direct contact
with new scent pad.
Step 3
Insert wet filter into filter
tray. Place filter tray back
in humidifier.
Step 3
Insert scent pad into Scent
Pad Slot. You can use
the bag as a holder
during insertion.