Charcoal Embers; Glowing Embers; Hood - Napoleon GVF36P Installation And Operating Instructions Manual

14
Replacement loose material must be purchased from
the original manufacturer. Application of
excess loose material may adversely affect the
performance of the appliance.
Log colours may vary. During the initial use of the
appliance, the colours will become more uniform as
colour pigments burn in during the heat activated curing
process.
Reinstall rod assembly and mesh curtain.
5.2

CHARCOAL EMBERS

Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
5.3

GLOWING EMBERS

Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of
the small logs. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed
edges of the fi bre hairs will glow.
NOTE: The ember material will only glow when exposed to direct fl ame; however, care should be taken
to not block the burner ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. PHAZER
logs glow when exposed to direct fl ame. Use only certifi ed "glowing embers" and PHAZER
from your Napoleon dealer.
5.4

HOOD

APPLIANCE SCREENS MUST BE CLOSED WHILE THE APPLIANCE IS IN OPERATION.
W415-0297 / N / 11.23.10
THE APPLIANCE MUST NOT BE USED WHEN THE HOOD IS REMOVED.
HOOD
CURTAIN
MESH
WARNING
!
Hook the hood over the lip of the curtain support plate.
32.1
TM
TM
logs available