Polaris RMK 2004 Owner's Manual page 116

TROUBLESHOOTING
Engine Troubleshooting
Problem
Noise in drive
system
Poor low RPM
performance
Engine doesn't
start (electric
start models)
Engine doesn't
turn
114
Probable Cause
Broken drive clutch
components
Bearing failure/
chaincase, jack-
shaft, or front drive
shaft
Drive belt surface
flat spots
Drive chain loose
or worn, sprocket
teeth broken
Worn drive belt
Excessive belt/
sheave clearance
Loose torque stop
Sticky clutch
Wire connections
Seized engine
Hydrostatic lock
Solution
- SEE YOUR DEALER.
- SEE YOUR DEALER.
- Inspect and replace if necessary.
- Inspect and adjust or replace.
- Inspect and replace if necessary.
- SEE YOUR DEALER.
- Inspect and adjust.
- SEE YOUR DEALER.
- SEE YOUR DEALER.
- SEE YOUR DEALER. Seizure is a result
of poor lubrication, inadequate fuel supply,
broken parts, or improper cooling.
- Fuel may have entered crankcase while
vehicle was standing or being transported.
SEE YOUR DEALER to correct cause.
Drain plug(s) are located on lower
crankcase for emergency draining.